Design Center

MyPOWER On-line Design Center

The MyPOWER On-line Design Center, combines with overnight evaluation board fulfillment to cut weeks, or months of design time for advanced power systems. Try it yourself and design your own DC-DC converter following the 4 easy steps:

  1. Enter your system requirements
  2. Simulate the proposed design for system behavior performance
  3. Optimize your design by selecting alternate passive components
  4. Order a customized design kit including a standard, fully assembled and tested evaluation board with the necessary passives to personalize your design

Register and start a design using
MyPOWER On-line Design Center

APPLICATIONS

20 to 80A, 200kHz to 1MHz, 1.1V to 1.85Vout multiphase buck converters
Work stations, servers, networking, telecom
High current DC-DC power supplies
Up to 92% efficiency
Up to 40% smaller than discrete
FEATURES AT A GLANCE

On-line design and simulation tool
+/-5% simulation accuracy in less than 5 seconds
Customized evaluation kit delivered within 24hr in USA, 3 days overseas
Cuts weeks, or months of design time
Eliminates much of the breadboarding development

The MyPOWER On-line Design Center integrates a highly accurate (5%), ultra-fast simulation tool (less than 5 seconds) with a very efficient supply chain to deliver a customized evaluation board kit within 24 hours in the Continental US and three days overseas. The MyPOWER Online Design Center is now available for DC-DC converters operating in the range of 20A to 80A, 200kHz to 1000kHz frequency and 1.1V to 1.85V out.

Enter your system requirements, Vin, Vout, Iout. The MyPOWER On Line Design Center generates a proposed multiphase design using the iP2001 iPOWIR™ building block, including the bill of materials.

You can run a simulation to verify system behavior, and optimize the circuit for performance and cost, eliminating much of the traditional breadboarding development time. The simulator is capable of generating waveforms for step loads, changing input voltages, stability, steady state transient analysis and a complete AC analysis. High accuracy provides robust designs. The components used in the design provide the highest performance power system available in the industry. Once you have settled on your design, you can immediately order a customized evaluation kit for prototyping and final production circuit development.

By incorporating non-idealized FET models and parasitics into the power system model and mathematically reducing them to a few equations with MathCAD, the Spice simulator incorporated in the MyPOWER Online Design Center demonstrates 5% accuracy while compressing computational time down to two seconds.


For more information:

Contact the Technical Assistance Center or your local Sales Rep.