MOSFETs |
.pdf |
.htm |
Title |
|
DT 99-2 |
Estimated Tj of Power MOSFETs |
|
DT 95-2 |
New Fifth Generation Power Mosfets: A Replacement Guide |
|
DT 94-8 |
Reverse Battery Protection W/ HEXFETs Doubles Battery Life |
|
DT 94-7A |
Low Gate Charge HEXFETS simplify Gate Drive and Lower Cost |
|
DT 94-5A |
Using MOS-Gated Power Transistors in AC Switch Applications |
|
DT 92-5 |
SPICE Models for MOS-Gated Power Devices |
IGBTs |
.pdf |
.htm |
Title |
|
DT 99-1 |
Overshoot Voltage Reduction Using IGBT Modules With Special Drivers. |
|
DT Warp |
Using WARP Speed IGBTs In Place Of Power MOSFETs at Over 100kHz Converter Applications |
|
DT 94-4 |
Trade-Off Considerations Between Efficiency and Short Circuit Capability in IGBTs |
CICs |
.pdf |
.htm |
Title |
|
DT 02-1 |
Isolation Method for 1-10V Controlled Ballast, Based on the IR2159 |
|
DT 00-1 |
Designing with the IR2137. |
|
DT 99-8 |
Using IR2171/IR2172 within DSP-controlled AC Drives. |
|
DT 99-7 |
Allieviating High-Side Latch On Problem at Power Up. |
|
DT 98-4 |
Technical Overview of IR215x Products |
|
DT 98-2 |
Bootstrap Component Selection For Control ICs |
|
DT 98-1 |
Variable Frequency Drive using IR215x Self-Oscillating IC’s |
|
DT 97-3 |
Managing Transients in Control IC Driven Power Stages |
|
DT 94-13 |
Push-Pull Drive Circuit |
|
DT 94-12 |
Optically Isolated Gate Drive Circuit (High Side) |
|
DT 94-11 |
3-Phase Bridge Drive with Overcurrent Protection (IR2130) |
|
DT 94-10A |
Choosing the Correct Dropping Resist. for IR2151/52/55 Control ICs |
|
DT 94-9 |
Maximizing the Latch Immunity of the IR2151 & 52 in Ballast Apps. |
|
DT 94-3A |
Simple Electronic Ballast using IR2151/52/55 Control ICs |
|
DT 92-4A |
Simple High Side Drive Provides Fast Sw. & Continuous On-Time |
|
DT 92-3B |
Using Control ICs to Generate Neg. Gate Bias for MOSFETs & IGBTs |
|
DT 92-2A |
High Current Buffer for Control IC’s |
Integrated Power Switch |
.pdf |
.htm |
Title |
|
DT 99-6 |
Intelligent Power Switch (IPS) Operation in an Automotive Environment |
|
DT 99-5 |
Intelligent Power Switch (IPS) Switching & Diagnostic Capabilities |
|
DT 99-4 |
Intelligent Power Switch (IPS) Basic Features & Protection |
Packaging |
.pdf |
.htm |
Title |
|
DT 99-3 |
Soldering SO-8 |
|
DT 94-17 |
Thermal Resis. Characterization for New Surface Mount Devices |
|
DT 94-2 |
Choosing Between Multiple Discretes and High Current Modules |
|
DT 93-4 |
Current Capability of TO-220 Package |
Lighting |
.pdf |
.htm |
Title |
|
DT 02-1 |
Isolation Method for 1-10V Controlled Ballast, Based on the IR2159 |
|
DT 95-3 |
Ultra-Compact Flourescent Ballasts Using the IR51 Half-Bridge Sips |
|
DT 94-9 |
Maximizing the Latch Immunity of the IR2151 & 52 in Ballast Apps. |
|
DT 94-3A |
Simple Electronic Ballast using IR2151/52/55 Control ICs |
|
DT 94-1A |
Keeping the Bootstrap Capacitor Charged in Buck Converters |
Diodes |
.pdf |
.htm |
Title |
|
DT 97-12 |
Soft Recovery Diodes Help in Designing More Reliable Alternators with Improved EMI |
|
DT 97-11 |
QuietIR Series Used in DC Motor Chopper Applications |
|
DT 97-10 |
On-Line UPS with PFC |
|
DT 97-9 |
QuietIR Series Used in High Frequency Welding Applications |
|
DT 97-8 |
EMI Reduction Using QuietIR |
|
DT 97-7 |
Line Surges in Input Rectifiers |
|
DT 97-6 |
Power Factor Correction: Discontinous Mode |
|
DT 97-5 |
High Voltage Generators for De-Magnetizing Systems |
|
DT 93-1 |
Testing High Power SCRs and Diodes |
Thyristors |
.pdf |
.htm |
Title |
|
DT 94-14 |
Isolated SCR Gate Drive Circuit |
|
DT 94-14 |
Isolated SCR Gate Drive Circuit |
|
DT 93-1 |
Testing High Power SCRs and Diodes |
Motor Drives |
.pdf |
.htm |
Title |
|
DT 97-4 |
Inrush Current Control in Motor Drives |
|
DT 93-6B |
Miniaturization of the Power Electronics for Motor Drives |
DC-DC |
.pdf |
.htm |
Title |
|
DT 97-1 |
Reducing Switching Losses in Portable DC/DC Converters |
Relays |
.pdf |
.htm |
Title |
|
DT 95-1 |
Replacing Mechanical Relays with IR’s PVT412L Microelectronic Relay in Fax/Modem Designs |